Mega Sale Domains @ Rs.99

Monday, January 31, 2011

Job Outlook

Job Outlook

Overall employment of barbers, cosmetologists, and other personal appearance workers is projected to grow much faster than the average for all occupations. Opportunities for entry-level workers should be favorable, while job candidates at high-end establishments will face keen competition.

Employment change. Personal appearance workers will grow by 20 percent from 2008 to 2018, which is much faster than the average for all occupations.

Employment trends are expected to vary among the different occupational specialties. Employment of hairdressers, hairstylists, and cosmetologists will increase by about 20 percent, much faster than average, while the number of barbers will increase by 12 percent, about as fast as average. This growth will primarily come from an increasing population, which will lead to greater demand for basic hair services. Additionally, the demand for hair coloring and other advanced hair treatments has increased in recent years, particularly among baby boomers and young people. This trend is expected to continue, leading to a favorable outlook for hairdressers, hairstylists, and cosmetologists.

Continued growth in the number full-service spas and nail salons will also generate numerous job openings for manicurists, pedicurists, and skin care specialists. Estheticians and other skin care specialists will see large gains in employment, and are expected to grow almost 38 percent, much faster than average, primarily due to the popularity of skin treatments for relaxation and medical well-being. Manicurists and pedicurists meanwhile will grow by 19 percent, faster than average.

Job prospects. Job opportunities generally should be good, particularly for licensed personal appearance workers seeking entry-level positions. A large number of job openings will come about from the need to replace workers who transfer to other occupations, retire, or leave the labor force for other reasons. However, workers can expect keen competition for jobs and clients at higher paying salons, as these positions are relatively few and require applicants to compete with a large pool of licensed and experienced cosmetologists. Opportunities will generally be best for those with previous experience and for those licensed to provide a broad range of services.

Employment

Employment

Barbers, cosmetologists, and other personal appearance workers held about 821,900 jobs in 2008. Of these, barbers and cosmetologists held 684,200 jobs, manicurists and pedicurists 76,000, skin care specialists 38,800, and shampooers 22,900.

Most of these workers are employed in personal care services establishments, such as beauty salons, barber shops, nail salons, day and resort spas. Others were employed in nursing and other residential care homes. Nearly every town has a barbershop or beauty salon, but employment in this occupation is concentrated in the most populous cities and States.

About 44 percent of all barbers, cosmetologists, and other personal appearance workers are self-employed. Many of these workers own their own salon, but a growing number of the self-employed lease booth space or a chair from the salon's owner. In this case, workers provide their own supplies, and are responsible for paying their own taxes and benefits. They may pay a monthly or weekly fee to the salon owner, who is responsible for utilities and maintenance of the building.

Training, Other Qualifications, and Advancement

Training, Other Qualifications, and Advancement

All States require barbers, cosmetologists, and other personal appearance workers to be licensed, with the exceptions of shampooers. To qualify for a license, most job seekers are required to graduate from a State-licensed barber or cosmetology school.

Education and training. A high school diploma or GED is required for some personal appearance workers in some States. In addition, most States require that barbers and cosmetologists complete a program in a State-licensed barber or cosmetology school. Programs in hairstyling, skin care, and other personal appearance services can be found in both high schools and in public or private postsecondary vocational schools.

Full-time programs in barbering and cosmetology usually last 9 months or more and may lead to an associate degree, but training for manicurists and pedicurists and skin care specialists requires significantly less time. Shampooers generally do not need formal training. Most professionals take advanced courses in hairstyling or other personal appearance services to keep up with the latest trends. They also may take courses in sales and marketing.

Licensure. All States require barbers, cosmetologists, and other personal appearance workers to be licensed, with the exception of shampooers. Qualifications for a license vary by State, but generally a person must have a high school diploma or GED, be at least 16 years old, and have graduated from a State-licensed barber or cosmetology school. After graduating from a State approved training program, students take a State licensing examination. The exam consists of a written test and, in some cases, a practical test of styling skills or an oral examination. In many States, cosmetology training may be credited toward a barbering license, and vice versa, and a few States combine the two licenses. Most States require separate licensing examinations for manicurists, pedicurists, and skin care specialists. A fee is usually required upon application for a license, and periodic license renewals may be necessary.

Some States have reciprocity agreements that allow licensed barbers and cosmetologists to obtain a license in another State without additional formal training, but such agreements are uncommon. Consequently, persons who wish to work in a particular State should review the laws of that State before entering a training program.

Other qualifications. Successful personal appearance workers should have an understanding of fashion, art, and technical design. They also must keep a neat personal appearance and a clean work area. Interpersonal skills, image, and attitude play an important role in career success. As client retention and retail sales become an increasingly important part of salons' revenue, the ability to be an effective salesperson becomes ever more vital for salon workers. Some cosmetology schools consider “people skills” to be such an integral part of the job that they require coursework in that area. Business skills are important for those who plan to operate their own salons.

Advancement. Advancement usually takes the form of higher earnings, as barbers and cosmetologists gain experience and build a steady clientele. Some barbers and cosmetologists manage salons, lease booth space in salons, or open their own salons after several years of experience. Others teach in barber or cosmetology schools or provide training through vocational schools. Still others advance to other related occupations, such as sales representatives for companies that sell salon-related products, image or fashion consultants, or examiners for State licensing boards.

Nature of the Work

Nature of the Work

Barbers and cosmetologists focus on providing hair care services to enhance the appearance of customers. Other personal appearance workers, such as manicurists and pedicurists, shampooers, and skin care specialists, provide specialized beauty services that help clients look and feel their best.

Barbers cut, trim, shampoo, and style hair mostly for male clients. They also may fit hairpieces and offer scalp treatments and facial shaving. In many States, barbers are licensed to color, bleach, and highlight hair, and to offer permanent-wave services. Barbers also may provide skin care and nail treatments.

Hairdressers, hairstylists, and cosmetologists offer a wide range of beauty services, such as shampooing, cutting, coloring, and styling of hair. They may advise clients on how to care for their hair at home. In addition, cosmetologists may be trained to give manicures, pedicures, and scalp and facial treatments; provide makeup analysis; and clean and style wigs and hairpieces.

A number of workers offer specialized services. Manicurists and pedicurists, called nail technicians in some States, work exclusively on nails and provide manicures, pedicures, polishing, and nail extensions to clients. Another group of specialists is skin care specialists, or estheticians, who cleanse and beautify the skin by giving facials, full-body treatments, and head and neck massages, as well as apply makeup. They also may remove hair through waxing or, if properly trained, with laser treatments. Finally, in larger salons, shampooers specialize in shampooing and conditioning hair.

In addition to working with clients, personal appearance workers may keep records of hair color or skin care regimens used by their regular clients. A growing number actively sell hair, skin, and nail care products. Barbers, cosmetologists, and other personal appearance workers who operate their own salons have managerial duties that may include hiring, supervising, and firing workers, as well as keeping business and inventory records, ordering supplies, and arranging for advertising.

Work environment. Many full-time barbers, cosmetologists, and other personal appearance workers put in a 40-hour week, but longer hours are common, especially among self-employed workers. Work schedules may include evenings and weekends, the times when beauty salons and barbershops are busiest. Many workers, especially those who are self-employed, determine their own schedules. In 2008, about 29 percent of barbers, hairstylists and cosmetologists worked part time, and 14 percent had variable schedules.

Barbers, cosmetologists, and other personal appearance workers usually work in clean, pleasant surroundings with good lighting and ventilation. Most work in a salon or barbershop, although some may work in a spa, hotel, or resort. Good health and stamina are important, because these workers are on their feet for most of their shift. Prolonged exposure to some hair and nail chemicals may cause irritation, so protective clothing, such as plastic gloves or aprons, may be worn.

Nail technicians work in salons and provide various services including manicures.
Nail technicians work in salons and provide various services including manicures.

History

History

Diego D'Ambrosio Way

Two years after D'Ambrosio emigrated from Italy to the United States in 1961, he began working in his first hair salon.[1] D'Ambrosio opened his own shop, Diego's Hair Salon, in 1965.[2] Around 1980, he moved his business to its current location, The Moorings, a nautical-themed, former apartment building located at 1901 Q Street, N.W., in Dupont Circle.[1][3] The Moorings is an Art Deco-style building designed by architect Horace W. Peaslee in 1927 and was listed on the National Register of Historic Places in 1978.

When he moved to The Moorings, D'Ambrosio raised the price of men's haircuts to $20, the same rate he charges today.[1] Rupert Cornwell of The Independent described Diego's as a "modest and friendly establishment and the photos on its walls capture Washington: unglamorous but beautiful, exuding power yet oddly homey, with history around every corner and great men's shadows on every wall."[4]

D'Ambrosio's honors

In 2009, D'Ambrosio was awarded the Order of the Star of Italian Solidarity at the Italian Embassy. The ceremony was in recognition of D'Ambrosio's promoting his Italian heritage.[1] On April 23, 2010, D.C. Mayor Adrian Fenty joined other local government officials in designating the 1900 block of Q Street, N.W., as Diego D’Ambrosio Way (an alternative street name). The Diego D'Ambrosio Way Designation Act of 2010 "officially recognizes Diego's contributions to District of Columbia residents and the city’s business community."[2]

Famous clientele

Diego's clientele has included Supreme Court Justices Warren E. Burger and William Rehnquist, Israeli Prime Minister Benjamin Netanyahu, former British Prime Minister John Major, Washington Archbishop Donald Wuerl, Apostolic Nuncio Pietro Sambi, former Italian ambassador Giovanni Castellaneta, Mayor Adrian Fenty, and members of the D.C. Council.[1][5] According to D'Ambrosio, 75 ambassadors, 17 presidents and prime ministers, and other officials representing a total of 135 countries have used his services.[5]

Diego's Hair Salon

Diego's Hair Salon

From Wikipedia(See original Wikipedia article ») Last modified on 25 September 2010 at 18:07

From Wikipedia, the free encyclopedia

Jump to: navigation, search
Diego's Hair Salon

Diego's Hair Salon is a hairdressing shop located in the Dupont Circle neighborhood of Washington, D.C., USA. Founded in the 1960s by Italian American Diego D'Ambrosio, the salon has become a neighborhood institution frequented by politicians, religious leaders, diplomats, and Supreme Court Justices. In recognition of D'Ambrosio's contribution to the local business community, a neighborhood street was renamed in his honor. The founder of the salon, Diego D'Ambriosio, has been awarded the Order of the Star of Italian Solidarity.

Composition history

Composition history

An opera based on the play had previously been composed by Giovanni Paisiello, and another was composed in 1796 by Nicolas Isouard. Though the work of Paisiello triumphed for a time, Rossini's later version alone has stood the test of time and continues to be a mainstay of operatic repertoire.

Rossini's opera recounts the first of the plays from the Figaro trilogy, by French playwright Pierre Beaumarchais, while Mozart's opera Le nozze di Figaro, composed 30 years earlier in 1786, is based on the second part of the Beaumarchais trilogy. The original Beaumarchais version was first performed in 1775, in Paris at the Comédie-Française at the Tuileries Palace.

Rossini was well known for being remarkably productive, completing an average of two operas per year for 19 years, and in some years writing as many as four. Musicologists believe that, true to form, the music for Il Barbiere di Siviglia was composed in just under three weeks, although some of the themes in the famous overture were actually borrowed from two earlier Rossini operas, Aureliano in Palmira and Elisabetta, regina d'Inghilterra.

Barbiere's first performance on February 20, 1816 was a disastrous failure: the audience hissed and jeered throughout, and several on-stage accidents occurred. However, many of the audience were supporters of one of Rossini's rivals, Giovanni Paisiello, who played on "mob mentality" to provoke the rest of the audience to dislike the opera. Paisiello had already composed The Barber of Seville and took Rossini's new version to be an affront to his version. In particular, Paisiello and his followers were opposed to the use of basso buffa, which is common in comic opera.[3] The second performance met with quite a different fate, becoming a roaring success. It is curious to note that the original French play of Le Barbier de Séville endured a similar story, hated at first only to become a favorite within a week.

Composition history

An opera based on the play had previously been composed by Giovanni Paisiello, and another was composed in 1796 by Nicolas Isouard. Though the work of Paisiello triumphed for a time, Rossini's later version alone has stood the test of time and continues to be a mainstay of operatic repertoire.

Rossini's opera recounts the first of the plays from the Figaro trilogy, by French playwright Pierre Beaumarchais, while Mozart's opera Le nozze di Figaro, composed 30 years earlier in 1786, is based on the second part of the Beaumarchais trilogy. The original Beaumarchais version was first performed in 1775, in Paris at the Comédie-Française at the Tuileries Palace.

Rossini was well known for being remarkably productive, completing an average of two operas per year for 19 years, and in some years writing as many as four. Musicologists believe that, true to form, the music for Il Barbiere di Siviglia was composed in just under three weeks, although some of the themes in the famous overture were actually borrowed from two earlier Rossini operas, Aureliano in Palmira and Elisabetta, regina d'Inghilterra.

Barbiere's first performance on February 20, 1816 was a disastrous failure: the audience hissed and jeered throughout, and several on-stage accidents occurred. However, many of the audience were supporters of one of Rossini's rivals, Giovanni Paisiello, who played on "mob mentality" to provoke the rest of the audience to dislike the opera. Paisiello had already composed The Barber of Seville and took Rossini's new version to be an affront to his version. In particular, Paisiello and his followers were opposed to the use of basso buffa, which is common in comic opera.[3] The second performance met with quite a different fate, becoming a roaring success. It is curious to note that the original French play of Le Barbier de Séville endured a similar story, hated at first only to become a favorite within a week.

The Barber of Seville

The Barber of Seville

From Wikipedia(See original Wikipedia article ») Last modified on 22 February 2011, at 08:51

From Wikipedia

Jump to: navigation, search

The Barber of Seville, or The Useless Precaution (Il barbiere di Siviglia, ossia L'inutile precauzione) is an opera buffa in two acts by Gioachino Rossini with a libretto by Cesare Sterbini. The libretto was based on Pierre Beaumarchais's comedy Le Barbier de Séville (1775), which was originally an opéra comique, or a mixture of spoken play with music. The première (under the title Almaviva, or the Useless Precaution) took place on 20 February 1816, at the Teatro Argentina, Rome. It was one of the earliest Italian operas to be performed in America and premiered at the Park Theater in New York City on 29 November 1825.[1] Rossini’s Barber has proven to be one of the greatest masterpieces of comedy within music, and has been described as the opera buffa of all opere buffe; even after two hundred years, its popularity on the modern opera stage attests to that greatness.[2]

Thiers Issard

Handles

The rivets are peened by hand to ensure stable movement of the razor blade while folding into the handle. The materials used are horn, exotic woods etc. The wood is impregnated with resins and pressed under high pressure to create a stable and water resistant material.[1]

Blade decoration

The blade is decorated by engraving or gold leafing depending on the price. Less expensive blades undergo an electrolytic black acid engraving process. For more expensive blades, gold leafing applied by hand is employed, following a traditional process.[1]

Sharpening

Sharpening is the final stage in the process. At first the blade is sharpened on a special grinding machine using a waterstone wheel. Following that the blade is hand honed on an antique Belgian flat waterstone. Finally the cutting edge is finished on a two-sided leather strop using a special paste on one side and natural oils from the human hand on the other.[1]

Testing

Finally the blade mechanical properties are tested. Flexibility, sharpness as well as special tone tests for singing razors take place at this stage.[

Finishing

Finishing

Subsequently to grinding the blade is polished to various degrees of gloss. The best finish is poli glace or mirror finish. Mirror finish is the only finish used if gold leafing is to be part of the decoration of the blade.[1]

Satin finish requires less polishing time and therefore is not as expensive to produce. This finish is mostly used with black acid etching. Satin finish can sometimes be applied, as a compromise, to the back of the blade while the mirror finish and gold leafing are applied to the more visible front of the blade. This way the blade will not be as expensive as a fully mirror finished one.[1]

Grinding

Grinding

Following the materials science processes of hardening and annealing, the blanks are hollow ground, according to one of the two fundamental blade profiles. At the highest end of hollow ground, more hollow than even the 1/1 grade, is the so called singing razor, so named because its blade produces a specific resonant tone when plucked, similar to a guitar string.[1][5] The singing razor blade at this excited stage is essentially a vibrating membrane. Its manufacturing process is so demanding that a full 25% of the blades get rejected as not meeting standards.[1] Thiers Issard does not produce flat ground (wedge) type blades.[1]

Lead hardening

Lead hardening

The steel is hardened through a special process using a bath of molten lead where the forged steel blade is immersed at 800 °C (degrees Celsius).[1] The efficient metal-to-metal heat transfer, from the surrounding lead to the steel blade, enables fast and uniform heating of the steel at the optimum temperature for maximum hardness. The annealing stage follows the hardening process, where at 300 °C the steel becomes flexible and brittleness is eliminated according to phase diagrams for steel.[1][6]

Thiers Issard is allowed by special exemption in French law to continue using this lead hardening process, while health concerns prohibit its use by any other manufacturer.[1]

The steel is hardened through a special process using a bath of molten lead where the forged steel blade is immersed at 800 °C (degrees Celsius).[1] The efficient metal-to-metal heat transfer, from the surrounding lead to the steel blade, enables fast and uniform heating of the steel at the optimum temperature for maximum hardness. The annealing stage follows the hardening process, where at 300 °C the steel becomes flexible and brittleness is eliminated according to phase diagrams for steel.[1][6]

Thiers Issard is allowed by special exemption in French law to continue using this lead hardening process, while health concerns prohibit its use by any other manufacturer.[1]

Razor construction

Razor construction

Loup et Bélier (wolf and ram) 6/8” extra hollow carbon steel singing blade. The gold inlaid heads of the wolf and the ram are on a mirror polished (poli glace) Sheffield silver steel blade. The double stabiliser implies full hollow ground blade. The lower side of the shank shows fluting for a more secure grip, while the upper side is smooth. The handle is faux tortoise. The razor comes in a leather pouch. Although the handle does not have a middle plug, the faux tortoise scales are wide apart like an arch and are resistant to deformation

A razor blade starts, at the Thiers Issard factory, as a shape called the blank supplied by the steel manufacturer. Thiers Issard traditionally has used Sheffield silver steel, long considered a superior quality carbon steel.[1][7] The first step is to clean the blank using a heavy forge process called the detourage. Following the forging stage a hole is drilled in the tang of the blade. This is a crucial step since after the steel hardening process it would be next to impossible to drill hardened steel without employing specialised methods such as electrical discharge machining, and even then the process would be too arduous to be practical. At this pre-hardening stage the decoration or guiochage of the blade is done, since the blade is malleable enough to be carved.[1]

History of Thiers Issard

History

Thiers Issard was established in 1884 by Pierre Thiers, (1860–1929). He was part of a family of master razor makers. The Thiers family owned their own forge.[1] The "Chart of the Jurande" or the Professional Guild Charter of the time lists at least three "Thiers" as master razor makers.[1]

In 1870 Pierre Thiers started as an apprentice to a master razor maker and after twenty four years in the trade he had mastered the art well enough to become famous among the cognoscenti and connoisseurs of fine cutlery.[1]

In 1884 Pierre Thiers established his own forge. He named his factory Thiers-Issard combining his last name and that of his wife as a way to differentiate himself from the rest of the family who owned similar businesses.[1] From 1884 until his death in 1929 Pierre Thiers worked in his forge and died, reportedly, at work.[1]

After his death, his son Pierre Thiers Jr. (1884–1962) assisted by his mother continued the family business.[1] Pierre Thiers Jr. worked as an apprentice under his father and he was a skilled forger in his own right.[1] As the business prospered more family members joined the company starting with Louis Thiers (1910–1985) and later by another Pierre Thiers (1914–1997).[1]

In 1985 the Thiers Issard company was acquired by Gilles Reynewaeter.

Thiers Issard

Thiers Issard

The Thiers Issard logo

Thiers Issard or Thiers Issard Sabatier is a French cutlery manufacturer; they are one of a number of companies using the Sabatier name. It exports a wide range of knives and straight razors to approximately thirty countries.[1][2] They are viewed as one of the top cutlery firms in Europe.[3][4] They are considered, along with DOVO, as one of the leading manufacturers of straight razors in Europe as well as the rest of the world.[5][6][7] They are also makers of exclusive and very expensive Damascene steel knives.[5] They are located in Thiers, France, and are one of the better known of many cutlery manufacturers located in that area.[8] They have also been manufacturing razor blades since 1920.[2]

DOVO Solingen

DOVO Solingen

From Wikipedia(See original Wikipedia article ») Last modified on 11 December 2010 at 15:47

From Wikipedia, the free encyclopedia

Jump to: navigation, search
The DOVO Solingen logo
The Merkur logo. The Solingen logo, under the main Merkur logo, is the trademark of the place and as such it is shared by all Solingen based manufacturers
Poster of the DOVO Meisterwerke in Solingen. This shows the names of the original owners (as the DOVO brand name was not yet used) and the original location of the factory.

DOVO Solingen, or DOVO Steelware, or DOVO, is an independent German company, based in Solingen, that manufactures scissors, shaving equipment such as straight razors and safety razors, as well as manicure tools.[1] Shaving equipment and razors are produced by Merkur Solingen, a subsidiary of DOVO.

The name DOVO derives from the last names of the original founders (DO(rp)+VO(os)).[2]

As of 31 December 2001, the company employed 86 staff, who produced a daily output of 1200 scissors, 900 nippers, and 150 open razors and shavers. 75% of these products were exported to other countries, while the remaining 25% were sold in Germany.

Merkur 38C & Double Edge Blades. An example of current Merkur DE safety razor design and double edge blade packaging.
DOVO straight razor.


Facial hair

Facial hair

From Wikipedia(See original Wikipedia article ») Last modified on 25 February 2011, at 18:45

From Wikipedia

Jump to: navigation, search

Facial hair is a secondary sex characteristic in human males. Men often start developing facial hair in the later years of puberty or adolescence, approximately between 17–20 years of age, and most do not finish developing a fully adult beard until their early 20s or even later.[1][2] This varies, as boys may first develop facial hair between 14–16 years of age, and boys as young as 11 have been known to develop facial hair. In addition, the patches of hair can vary between bushy and bristly. Women are also capable of developing facial hair, especially after menopause, though typically significantly less than men.

Male pogonotrophy (the growing of facial hair; i.e., beardedness) is often culturally associated with wisdom and virility.[3] Men may style their facial hair into beards, moustaches, goatees or sideburns; others completely shave their facial hair. The term "whiskers," used when referring to human facial hair indicates the hair on the chin and cheeks.[4]





Table of Contents
1In male adolescence
2Military
3In religions
4In women
5See also
6References
7External links




In male adolescence

Abraham Lincoln was said to have grown a beard because an 11-year-old girl named Grace Bedell wrote to him, saying that he would look better with one.[5]

The moustache forms its own stage in the development of facial hair in adolescent males.[6] Facial hair in males does not always appear in a specific order during puberty and varies among some individuals but may follow this process:

  • The first facial hair to appear tends to grow at the corners of the upper lip,
  • It then spreads to form a moustache over the entire upper lip,
  • This is followed by the appearance of hair on the upper part of the cheeks, and the area under the lower lip,
  • It eventually spreads to the sides and lower border of the chin and the rest of the lower face to form a full beard.[7]
  • Although this order is commonly seen, it can vary widely, with some facial hair starting from the chin and up towards the sideburns.

Military

Depending on the periods and countries, facial hair was prohibited in the army or, on the contrary, an integral part of the uniform.

In religions

Many religious male figures are recorded to have had facial hair; for example, all the prophets mentioned in the Abrahamic religions (Judaism, Christianity and Islam) were known to grow their beards.[8] Other religions, such as Hinduism and Sikhism, encourage growing beards. Some scholars among Sunni Muslims see growing the beard to be an obligatory act as it was preferred by the Prophet Mohammed himself, while other scholars see it as encouraged but optional. Amish men grow beards after becoming married, but continue to shave their moustache in order to avoid historical associations with military facial hair due to their pacifistic beliefs.

In women

Women typically have little hair on their faces, apart from eyebrows and the vellus hair that covers most of their bodies. However, in some cases, women have noticeable facial hair growth, most commonly after menopause. Excessive hairiness (especially facially) is known as hirsutism, and is usually an indication of atypical hormonal variation. In contemporary western culture, many women shave, tweeze or otherwise depilate facial hair which does appear, as there is considerable social stigma associated with facial hair in women and freak shows and circuses historically displayed bearded women.

See also